(Update: for the newest Lala gems and "etruscan" chains click and follow HERE)
My copy after a circa 300 BC intaglio gem from
Ionic Greece (Hermitage). March 2016
Ancient carvers worked with a simple machine using oil and emery powder slurry to carve the gems (mostly chalcedony and agate):
For my intaglios I used a binocular microscope and an electric rotary tool with sintered diamond bits and a continuous water supply instead.
Here are my results so far:
My first intaglio, Pegasus (agate).
This was a freehand copy after a larger Roman gem.
A cupid riding a panther, carnelian intaglio
An engagement ring commission on chrysoprase in 2015
Head of Zeus Olympios intaglio on carnelian and impression,
in progress March 2016
If you are interested to see the entire process from the rough mineral to the finished gem, here is Chavdar Chushev's carving video made for the Getty:
More photos of the process:
that is prepared on a heating surface on the left.
The box on the right contains sintered diamond bits of all shapes and sizes.
Once the gem was on the dop stick, I sketched the design using diamond point and silverpoint and blocked the main shapes in with large round diamond bits.
Further work was done using smaller round, wheel- and cone-shaped bits.
The biggest difficulty was not being able to see well because water obscures the view as you carve, though not as much as the thick oil and abrasive slurry, which I will try using later. Another difficulty is learning to control the rotating tool especially when making curved lines.
In parallel I have also tried my hand at caving miniature black coral sculptures using the rotary tool with steel burs, abrasive wheels, nylon brushes, and polishing wheels and compounds. This was my first time sculpting in the round.
Cat and rabbit miniature sculptures in black coral